ホーム > 商品情報
產品說明
| General Information |
| P/N: | DS03-S000-00-2 | Rated Power: | 300W |
| Rated Wind Speed: | 13.5 m/s | Rated Speed: | 835 rpm |
| Cut-In Wind Speed: | <3 m | Cut-Out Wind Speed: | 15.5 m/s |
| Survival Wind Speed: | 60 m/s |
| Dimension/Weight |
| Rotor Diameter: | 1.24m | Rotor Height: | 1.06m |
| Mast Height(Not Included): | 4m | Total Height: | 5.06m |
| Total Weight: | 25.5 Kgs | (Mast not included) |
| Rotor Specification |
| External Darrieus: | 3 Blades |
| Internal Savonius: | 2 Layers |
| Material of Blades: | Anodized Aluminum |
| Material of Axis: | Galvanized Steel SS400/Anodized Aluminum |
| Generator Specification |
| Generator Type: | AC, 3 Phase, Synchronism PMG |
| Rated Output: | 300W |
| Braking System |
| Automatic Braking: | Over speed short circuit braking system |
| Manual Braking: | 3-phase short circuit by NFB brake |
| Operation Environment |
| Ambient Temperature: | -10~40°C |
| Ambient Humidity: | 95% max. |
| Special Notes |
- Information and specification are subject to change without notice!
- The information provided is based on the use of our standard 4m mast, please consult your local certified engineer if you are going to install with the mast higher than 4m.
- Please follow your local regulations to install the DS-300 at proper location. Always consult your local certified civil engineer or structural engineer if you are planning to install the DS-300 on top of the roof.
| DS-300 Wind Charge Controller |
| Model: | WG0400 |
| Rated output: | 300 Watt |
| Max. output: | 400 Watt |
| Input: | 3 phase AC input |
| Voltage and Current range: | Special design to meet DS-300 Wind Generator operation range |
| Power Control: | With MPPT feature |
| Output to battery: | 12Vdc ( model: WG 0400-12) or 24Vdc ( model: WG 0400-24 ) |
| Max. charging current 16A | |
| Output to Load: | On/Off controlled by photo-sensor |
| Low Voltage protection: 11.5V ( WG 0400-12 ) or 23.0V ( WG 0400-24 ) | |
| Max. charging Current: 16 A | |
| 16 load control mode settings | |
| Protection Features: | 1. Wind turbine over-speed protection |
| 2. Input over voltage protection | |
| 3. Battery over charge protection | |
| 4. Battery low voltage protection | |
| 5. Over temperature protection | |
| Power consumption: | < 1 Watt ( Standby Model ) |
| LED indicator | |
| Dimensions (L x W x H in mm): | 200 x 142 x 50 |
| Weight: | 1.5 Kgs |
| Special Notes |
- Information and specification are subject to change without notice!
| DS-300 Power Curve and Dimension Figures | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
.png)
