ホーム > 商品情報



DS-300
瀏覽人數:762

產品說明

 

General Information
P/N: DS03-S000-00-2 Rated Power: 300W
Rated Wind Speed: 13.5 m/s Rated Speed: 835 rpm
Cut-In Wind Speed: <3 m Cut-Out Wind Speed: 15.5 m/s
Survival Wind Speed: 60 m/s    
Dimension/Weight
Rotor Diameter: 1.24m Rotor Height: 1.06m
Mast Height(Not Included): 4m Total Height: 5.06m
Total Weight: 25.5 Kgs (Mast not included)  
Rotor Specification
External Darrieus: 3 Blades
Internal Savonius: 2 Layers
Material of Blades: Anodized Aluminum
Material of Axis: Galvanized Steel SS400/Anodized Aluminum
Generator Specification
Generator Type: AC, 3 Phase, Synchronism PMG
Rated Output: 300W
Braking System
Automatic Braking: Over speed short circuit braking system
Manual Braking: 3-phase short circuit by NFB brake
Operation Environment
Ambient Temperature: -10~40°C
Ambient Humidity: 95% max.
Special Notes
  • Information and specification are subject to change without notice!
  • The information provided is based on the use of our standard 4m mast, please consult your local certified engineer if you are going to install with the mast higher than 4m.
  • Please follow your local regulations to install the DS-300 at proper location. Always consult your local certified civil engineer or structural engineer if you are planning to install the DS-300 on top of the roof.

 

 

DS-300 Wind Charge Controller
Model: WG0400
Rated output: 300 Watt
Max. output: 400 Watt
Input: 3 phase AC input
Voltage and Current range: Special design to meet DS-300 Wind Generator operation range
Power Control: With MPPT feature
Output to battery: 12Vdc ( model: WG 0400-12) or 24Vdc ( model: WG 0400-24 )
  Max. charging current 16A
Output to Load: On/Off controlled by photo-sensor
  Low Voltage protection: 11.5V ( WG 0400-12 ) or 23.0V ( WG 0400-24 )
  Max. charging Current: 16 A
  16 load control mode settings
Protection Features: 1. Wind turbine over-speed protection
  2. Input over voltage protection
  3. Battery over charge protection
  4. Battery low voltage protection
  5. Over temperature protection
Power consumption: < 1 Watt ( Standby Model )
LED indicator  
Dimensions (L x W x H in mm): 200 x 142 x 50
Weight: 1.5 Kgs
Special Notes
  • Information and specification are subject to change without notice!

 

 

 

DS-300 Power Curve and Dimension Figures

 

 

 

回上一頁置上

   |   会社案内   |   豆知識   |   商品情報   |   ニュースリリース   |   お問い合わせ   |  Facebook  |

REPTECH TAIWAN LIMITED      最高のブラウザ:ie 7,Firefox 3.5,解像度:1024x768 超える EN